Employee email


Home	About Us	Authorized Tech Specialist	Product Search	Case History	News	FAQ	Careers	Contact Us

Frequently Asked Questions

What is X-Calibur?

X-Calibur Construction Systems Inc. is focused in the supply of high quality specialist construction products. Our product range incorporates some of the latest technology worldwide reflecting our experience in working on projects internationally. More than 60% of our staff are qualified engineers, chemists or technologists

What is Construction?

Construction is a process that consists of the building or assembling of infrastructure. For the successful execution of a project, effective planning is essential. Those involved with the design and execution of the infrastructure in question must consider the environmental impact of the job, the successful scheduling, budgeting, site safety, availability of materials, logistics, inconvenience to the public caused by construction delays, preparing tender documents, etc.

What does Construction Chemistry mean?

Construction chemistry or construction chemicals is a broad generic term that is applied to engineered chemical formulations that are used to solve problems and add value to construction and restoration. It broadly covers admixtures and surface treatments to improve the quality of concrete, joint sealants and waterproofing, specialist grouts, resin anchors, construction adhesives, grinding aids for cement and industrial flooring systems.

Can X-Shield RG40SF be applied to wooden, exterior doors? The data sheet does not indicate wood, but seems to reference only metal and concrete.

X-Shield RG40SF can be applied to wooden exterior doors. It is quite viscous so if their are any reliefs or patterns you may lose some definition The door should be sanded down and primed with X-Shield ProPrime S.

Do you have an agent or set up in India.

Our operation in the UAE (Dubai & Sharjah) looks after India. We are no present yet but are working on being established in India within the next 18 months i.e. by June 2011.

What is the color range available for X-Shield EpoxyFloor SL?

We use the RAL Color System. Standard colors for all our epoxy flooring products are shown in our Epoxy Flooring brochure (please e-mail info@x-calibur.us to receive a copy). Any RAL color can be supplied to special order.

Please suggest the best method to prepare a new concrete floor surface to receive an epoxy floor coating.

We recommend whenever possible that captive grit blasting is used along with a primer. We do not recommend surface grinding as we have seen many failures particularly in car parks when this method was used. The use of a primer helps to ensure maximum bond although many suppliers suggest that a primer is not required we consider it a false economy. When captive blasting is not feasible then we would suggest mechanical wire brushing, needle scabbling, abrasive disk (i.e. leave a rough finish)

To embed a rebar (grade 500 metric) of 25mm diameter, around a circular column from the load design it is mentioned they should have embeded depth of 225mm to get a tensile load of 72.8 kN (allowable load),but around the column some places they have an embedment depth of 140mm. What is the allowable load capacity in this situation.

For T25 bar (grade 500B) in 32mm dia hole x 140mm deep (30MPa concrete) can be calculated as follows: 1) characteristic steel strength = 245kN 2) characteristic bond failure load = 152kN 3) characteristic concrete resistance in (30MPa concrete) = 91.4kN The lowest of these three i.e. 91.4kN is the characteristic resistance of the anchorage. The design resistance is obtained by applying the material partial safety factor of 1.8 to this characteristsic resistance. Therefore the design resistance of the T25 x 140mm anchorage in 30MPa concrete is 50.8kN.

Does X-Mix CrystalMiax have any impact on concrete's durability and/or compressive strength?

X-Mix CrystalMix will have a positive effect on durability and compressive strengths due to pores in the concrete being filled. This will result in lower permeability and absorption and therefore increased durability. Compressive strength increases of up 15% has been reported.

Can X-Calibur supply X-Seal PS800 (gun grade and/or pouring grade)in blue colour for special pool applications?

Polysulfide sealants are not recommended for use in swimming pool applications as they cannot resist the high level of chlorine that is used to super chlorinate. We suggest for swimming pools that X-Seal PoolSeal HPS is used and it is available in blue. If fast cure is important then we would recommend X-Seal PU600 which can be made in blue to special order. A primer will be required on porous surfaces and we would recommend X-Seal EP Primer.

I refer to your X-Shield EpoxySeal SP. Our Contractor has used it on site as a temporary protection for the reinforcement bar. I would like to find out if X-Shield EpoxySeal SP can be left on the bar and cast in as part of the structural element or it has to be removed before concreting.

Thanks for your question. Assuming that the reinforcing bar is a deformed bar i.e. one with ribs (a normal high tensile bar). Then it will not be necessary to remove the EpoxySeal SP. It will behave like an epoxy coated rebar with regard to bond.

Ihave to use a cement: sand grout of 1:1 mix. Water cement ratio is about 0.45 Please state what test to conduct so as to ensure that the flow is proper?

The test required is ASTM-C939-02 please check following link for appropriate equipment needed to carry out the test. http://www.humboldtmfg.com/c-4-p-308-id-4.html Please note that neat grout with only sand will require good particle gradation to ensure good flow, but even then neat grouts would shrink therefore use of expanding grout admixture like X-tite grout Expansion agent is strongly recommended. Actual water cement ratio will have to be adjusted by conducting trials to ensure bleed free consistency. For further finer details we would need your sand gradation.

Please recommend a joint filler material (needs to be dielectric insulation) between precast concrete paver and granite for exterior application.

X-Seal JointBoard P60 will be suitable. The are polyethylene based products so will act as an insulator.

sir, witch resin will use on the back of mirror (back mirror paint)and how it will use.is epoxy resin?please reply soon.thanks muhammad shamim

Mr.Shamim in your query it is not clear if you manufacture the mirrors or have ready made mirrors with you. Commercially supplied mirrors have metallic layer behind the glass( Aluminium or Silver)and the mirror manufacturer would protect it with a coating and supply. In case you have to make a protection please use X-Shield Epoxyseal CR a solvent free epoxy coating for metals and concrete.