X-Shield Surface Tissue 30 20620106
Surface reinforcing fabric for epoxy coating systems
X-Shield Surface Tissue 30 is a non-woven random C Glass fabric used with X-Shield epoxy coatings to reinforce the outer layer.
- High strength
- Easy to use
- Improve impact resistance
Laboratory Test Data
1.82m wide x 250m long rolls.
- Keep dry at all times
- Store under shade away from direct sunlight.
X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.
Health and Safety
This product is not considered hazardous.
Authorized Technical Specialist
Please note that only X-Calibur Authorized Technical Specialists ('ATSs') are permitted to change any of the information in this data sheet or to provide written recommendations concerning the use of this product. Visit www.x-calibur.us for a full list of X-Calibur ATSs.
X-Calibur makes modifications to its product datasheets on a continuous basis. Please check the datasheet update section on www.x-calibur.us to ensure you have the latest version.
X-Calibur supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. X-Calibur does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to X-Calibur in writing within five working days of being detected. X-Calibur Construction Systems Inc. makes no warranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied. X-Calibur Construction Systems Inc. shall not be liable for damages of any sort including remote or consequential damages, down time, or delay.