Technical Data Sheet

Waterproofing Systems

Back

X-Pruf RBE 35/05

Multi purpose rubberized bitumen emulsion

Uses:

  • Damp proof membrane
  • Curing compound
  • Concrete protection
  • Bathroom and kitchen waterproofing
  • General purpose waterproofing
  • Insulation board adhesive

X-Pruf LRP

Waterproofing membrane

Uses:

  • Wet areas
  • Planters
  • Roofs
  • Bathrooms and Laundries
  • Kitchens and Food Processing Areas
  • Terraces and Balconies
  • Slab foundations

X-Pruf CrystalCoat Concentrate

Cementitious crystalline waterproof coating for concrete

Uses:

  • Concrete and block substrates
  • Above or below ground structures
  • Potable water tanks
  • Wastewater structures
  • Basements
  • Elevator pits
  • Tunnels
  • Interior and exterior waterproofing

X-Pruf FlexBit SB

Liquid applied single component elastomeric membrane

Uses:

  • Damp proofing of block work
  • Vapor barrier for concrete
  • Protection against chloride and sulfate attack
  • Below grade protection of concrete
  • Wet area waterproofing
  • Protective coating for steel
  • Planters
  • Inverted Roofs

X-Pruf PU1

One component polyurethane liquid applied waterproofing membrane

Uses: Waterproofing of:

  • Wet areas
  • Planters
  • Roofs
  • Plaza decks
  • Slab foundations

X-Pruf HLE

High Latex bitumen emulsion membrane and curing compound

Uses:

  • Damp proof membrane
  • Vapor seal
  • Below grade concrete protection
  • Behind facade concrete and masonry protection
  • Curing membrane

X-Pruf RBE 60/10

High performance high build rubberized bitumen emulsion

Uses:

  • Damp proof membrane
  • Curing compound
  • Concrete protection
  • Bathroom and kitchen waterproofing
  • General purpose waterproofing
  • Insulation board adhesive

X-Pruf RBE 65/10

High performance high build rubberized bitumen emulsion

Uses:

  • Damp proof membrane
  • Curing compound
  • Concrete protection
  • Bathroom and kitchen waterproofing
  • General purpose waterproofing
  • Insulation board adhesive

X-Pruf SBE25

Multi-purpose cold applied bitumen emulsion

Uses:

  • Damp proof membrane
  • Vapor seal
  • Below grade concrete protection
  • Behind facade concrete and masonry protection
  • Foundation coating
  • Curing membrane
  • Construction and expansion joint bond breaker

X-Pruf BitMastic

Polymer modified asphalt sealing compound

Uses: Sealing of gaps on roofs. Termination chase seal for waterproofing membranes. Sealing of pipe penetrations for waterproofing membranes. Sealing cracks in asphalt and concrete pavements. Construction joint sealant for concrete pavements and canals.

X-Pruf CrystalCoat

Cementitious crystalline waterproofing coating that penetrates new and old concrete to resist hydrostatic pressure

Uses: Exterior (positive side) or interior (negative side) waterproofing. Below or above grade basements, foundations, retaining walls and water tanks.

X-Pruf ElastoCem

High technology polymer modified elastomeric waterproofing membrane system for concrete, asphalt and masonry surfaces

Uses: X-Pruf ElastoCem when fully cured, provides a seamless elastic waterproof membrane for use in roof areas, wet areas, and pre-cast joints where a hard elastomeric water-tight membrane is required.

X-Pruf PU2

Two-part polyurethane elastomeric liquid applied membrane

Uses: High performance fast cure liquid applied sheet membrane for use in difficult to waterproof applications such as wet area in public facilities and water features.

X-Pruf RBE

Asphalt/latex emulsion used for general purpose damp proofing and curing

Uses: Damp proofing membrane and curing compound for below grade application. Can be used to bond insulation boards and joint fillers. Also available with a higher latex content (X-Pruf HLE).

X-Pruf PU1 PLus

Single component hybrid PU-A liquid applied waterproofing membrane

Uses: Waterproofing of:

  • Wet areas
  • Planters
  • Plaza decks
  • Slab foundations
  • Penetrations

X-Pruf RB Membrane

Liquid applied high build high performance polymer modified asphalt

Uses: For use in situations where higher build and higher elongation are required over normal rubberized bitumen emulsions such as wet areas, inverted roofs and ground slabs.

X-Pruf SBE

High build bitumen emulsion coating and curing compound

Uses:

  • Damp proof membrane
  • Vapor seal
  • Below grade concrete protection
  • Behind facade concrete and masonry protection
  • Foundation coating
  • Curing membrane
  • Construction and expansion joint bond breaker

X-Pruf TP80

Single component tar extended polyurethane waterproofing membrane

Uses: Waterproofing of:

  • Wet areas
  • Planters
  • Roofs
  • Plaza decks
  • Slab foundations

X-Pruf 3416

Liquid applied solvented asphalt coating

Uses: A liquid applied asphalt membrane complying with the requirements of British Standard 3416 used to protect concrete structures against the ingress of salts and other aggressive soil conditions. Can also be used on most metals.

X-Pruf 836HE

Single component high elongation modified polyurethane waterproofing membrane

Uses: A liquid applied sheet membrane for use when ASTM C836 performance criteria is specified. Can be applied in a single coat.