Fast setting flowable resin grout
Uses: Base plate grouting, Manhole bedding, Runway light bedding, Dewatering holes, Anchor bolts
Low alkali shrinkage compensated grout
Uses: Base plate grouting, Upstand grouting, Gap filling, Concrete repair
High strength shrinkage compensated grout
Uses: Precision grouting of: Bridge bearings, Base plates, Anchor bolts, Crane rails, Columns, Pre-cast elements, Machines, Bridge beds, Anchor grouting of machines and threaded rods, Hole footings
Fast setting multi-purpose epoxy grout
Uses: Base plate grouting, Machine grouting, Crane rail grouting, Anchor bolts, Airfield lighting
Thick section epoxy grout
Uses: Base plate grouting, Machine grouting, Pile Cap Encapsulation
General purpose non-shrink grout
Uses: Anchor bolts, Base plates, Crane rails, Bridge bearings, Columns, Pile cap re-profiling, Pre-cast elements, Cast and form concrete repairs
Non-shrink grout for use in high sulfate concentrations
Uses: Anchor bolts, Base plates, Crane rails, Bridge bearings, Columns, Pile cap re-profiling, Pre-cast elements, Cast and form concrete repairs
Pre-bagged sulfate resistant cementitious grout
Uses: Micro Pile, Pre-cast elements, Cast and form concrete repairs
Fast setting, high early strength epoxy grout
Uses: X-Tite EpoxyGrout HES is used for free flow grouting in a wide range of applications where early strength gain is a pre-requisite.
Epoxy grout for airfield lighting application
Uses: Grouting of airfield lighting modules
Non-shrink Injection Grout
Uses: Injection beneath slabs, Horizontal ducting, Narrow gap grouting, Pre-cast elements
High performance fluid grout
Uses: Injection beneath slabs, Anchors and couplers, Horizontal ducting, Narrow gap grouting, Pre-cast elements
Shrinkage compensated fast setting pourable grout for GRC tiles and panels
Uses: For grouting gaps up to 40mm wide between GRC tiles and panels
X-Tite HighStrength Grout TS
Uses: Precision grouting of: Bridge bearings, Base plates, Anchor bolts, Crane rails, Columns, Pre-cast elements, Machines, Bridge beds, Anchor grouting of machines and threaded rods, Hole footings
General purpose non-shrink grout
Uses:
High performance shrinkage compensated grout
Uses: Precision grouting of: Bridge bearings, Base plates, Anchor bolts, Crane rails, Columns, Pre-cast elements
Thick section shrinkage compensated grout
Uses: Base plates, Pre-cast elements, Large infill’s
Pre-bagged cementitious grout
Uses: Pipe protection, Void filler
Activated sodium bentonite
Uses: Tunnel segment grouting, Diaphragm walls, Pipe jacking, Piling, Backfill grouting
Antiwashout grout admixture for underwater use
Uses: Powder additive for cement grout and concrete to minimize washout when placed underwater.
High strength shrinkage compensated grout
Uses: Precision grouting of bridge bearings, base plates, anchor bolts, crane rails, columns and pre-cast elements
High performance highly fluid cementitious grout
Uses: Post tensioned cables and rods, Rock and sheet pile anchors, Sonic tubes, Crack injection
General purpose non-shrink grout
Uses: General purpose grouting of elements where dual shrinkage compensation is not required.
Extreme temperature, high strength grout for heavy dynamic and static loads
Uses: A free flowing epoxy grout where the mechanical properties and heat resistance of the hardened grout must be of the highest order. Applications include heavy duty supports beneath crane and transporter rails, high speed turbines and centrifuges, drop forges, reciprocating machinery and other operating or test equipment subject to heavy dynamic or repetitive loads. Suitable for high temperature works up to 160C.
Multipurpose epoxy grout
Uses: Multipurpose flowable epoxy grout that can be used to grout gaps from 1/2” (12mm) to 6” (150mm). Can also be used for anchor and bolt grouting, concrete repair, bedding of bridge bearings and pile cap re-profiling.
Shrinkage compensating plasticising additive for cementitious grout
Uses: A powder additive added to site grout and concrete mixes to provide non-shrink properties, increased compressive strength, better flow and improved durability.
High performance shrinkage compensated grout
Uses: Precision grouting of anchor bolts, base plates, crane rails, bridge bearings, columns and precast elements.
Thick section shrinkage compensated grout
Uses: Anchor bolts, crane rails, bridge bearings & pre-cast elements
General purpose non-shrink grout for underwater use
Uses: Underwater grouting and concrete repair.